DIY Bracket Kit for Building a Narrow Pergola

2023-05-02T15:54:04-06:00

Price: 2099.00 - 2999.00 (13 variants)

About this Pergola Kit Configuration:

Type: Free-standing (see the attached version of this kit)

Bracket size: 6x6 (see the smaller 4x4 version of this kit)

Roof style: Square posts (see this same kit with an inline, traditional, or angled slats roof)

Privacy wall(s): None (see this same kit with 1, 2 or 3 privacy walls)

Rafter spacing: Medium (see this same kit with far or close rafter spacing)

Want something completely different? Use our easy design tool to create your own pergola configuration.

Included in this Bracket Kit for a Narrow Pergola (Up to 36' x 12'):

8x base brackets (for 6x6 wood)

4x 3-arm post brackets (for 6x6 wood)

4x 4-arm post brackets (for 6x6 wood)

24x 6x6 insert brackets for 12 roof rafters (6x6 wood)

Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets

NOTE: Wood (lumber) and anchoring hardware for securing the base brackets to a solid foundation are NOT included and will need to be purchased locally

This hardware/bracket kit will accommodate any narrow pergola ranging from 25-36 feet by 4-12 feet. The pergola does not need to be the exact dimensions shown in the images on this page.

The DIY-friendly kit includes 24 6x6 insert brackets. While the intent is that all 24 of these brackets will be used to insert 4 square 6x6 roof rafters over each of the 3 roof sections (12' span each with medium spacing), you can use the brackets any way you'd like (i.e. adding a privacy wall or half/partial wall, adding a side railing, increasing the number of slats in a roof/wall section, etc.). You can also purchase additional 6x6 insert brackets here.

Want a Smaller 4x4 Frame Instead?

Click here to see this same narrow pergola kit but for smaller 4x4 wood posts and 4x4 roof rafters (instead of 6x6 wood posts and 6x6 roof rafters).

About Our Steel 6x6 Pergola Brackets:

Made with premium quality steel

Made of 12-gauge steel (~2.6mm thick)

Laser-cut, bent and welded

Advanced weather coating technology to withstand extreme weather conditions

Pre-drilled holes for securing wood and accessories to brackets

Made for dressed lumber commonly called 6x6s (actual dimensions are 5.5" x 5.5")