
DIY Kit w/ Brackets to Build a Pergola
⬩ Wall-Mounted 2-Block pergola with a 6x6 Frame
⬩ Slatted Roof (2x6s Atop Beams) + 2 Privacy Walls
Included in this Patio Pergola with Roof Kit:
-
4x base brackets (for 6x6 wood) - 2x wall-mount brackets (for 6x6 wood)
- 2x 3-arm post brackets (for 6x6 wood)
- 2x 4-arm post brackets (for 6x6 wood)
- 60x 2x6 insert brackets for 30 roof/wall slats (2x6 wood)
- Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- NOTE: Wood (lumber) and anchoring hardware for securing the base brackets and wall-mount brackets are NOT included and will need to be purchased locally
This patio pergola with roof kit will accommodate any wall-mounted pergola ranging from 4-12 feet wide (attached to the house) by 13-24 feet deep (out from the home). Click here to see a pergola kit with the dimensions flip-flopped.
The kit includes a total of 60 2x6 insert brackets. While the intent is that 28 of these brackets be used for adding 7 roof rafters to each of the 2 roof sections (12' span each with medium spacing) and the remaining 32 be used for two privacy walls with 8 slats each (both 8' height with medium spacing), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, increasing the number of slats in a roof/wall section, etc.). You can also purchase additional 2x6 insert brackets here.
Want a Smaller 4x4 Frame Instead?
Click here to see this same pre-configured patio pergola with roof kit but with smaller 4x4 wood posts and 2x4 roof and wall slats (instead of 6x6 wood posts and 2x6 roof and wall slats).
About Our Steel 6x6 Pergola Brackets:
- Made with premium quality steel
- Made of 12-gauge steel (~2.6mm thick)
- Laser-cut, bent and welded
- Advanced weather coating technology to withstand extreme weather conditions
- Pre-drilled holes for securing wood and accessories to brackets
- Made for dressed lumber commonly called 6x6s (actual dimensions are 5.5" x 5.5")
- Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- Reduces your pergola build time by as much as 75%
- Backed by our 5-year warranty
- Shipped directly to your doorstep from Boise, Idaho
Specifications
- amazon bullet 1: Pergola kit includes: 4 base brackets, 2 wall-mount brackets, 2 3-arm post brackets and 2 4-arm post brackets (all for 6x6" wood posts) + 60 insert brackets for 2x6" wood slats + stainless steel screws (and screw caps) + complimentary drill bits
- amazon bullet 2: Attached pergola can be any size up to 12 feet wide (attached to the house), up to 24 feet deep (out from the house) and up to 10 feet tall
- amazon bullet 3: About our steel brackets: 1) 12-gauge steel (approximately 2.6mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
- amazon bullet 4: The 60 insert brackets allow you to add 14 2x6 roof rafters to your pergola (7 rafters per roof section) + 2 privacy walls with 8 2x6 slats each
- amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets and wall-mount brackets not included
- Assembled Height Ft: 8
- Assembled Length Ft: 24
- Assembled Width Ft: 12
- coverage area sqft: 288
- Required Lumber: As noted above, wood (lumber) is NOT included in this pergola bracket kit (nor is the hardware you'll need to anchor the base and wall-mount brackets).Before you can build your pergola, you'll need to purchase the following items from a local building supply store or lumber yard:- Four (4) 8' long 6x6 posts- Six (6) 12' long 6x6 posts- Thirty (30) 12' long 2x6 slats- Anchoring hardware (24 pieces)The estimated cost* for the above lumber and anchoring hardware is $1026. Together with the cost of this Zen Pergolas bracket kit, your estimated total all-in cost for your pergola is $2825.*Estimate only - Actual cost will vary depending on the type of wood you buy, your location, local stores & availability and various other factors.
- Text Over Image - Dark: lumber not included
- Preconfigured Slat Spacing: between the roof and wall slats (see kit w/ far or close spacing) between roof/wall slats (see far or close spacing)
- Preconfigured Privacy Walls: see this same kit with no privacy wall or with 1 privacy wall see kit w/ no walls or w/ 1 privacy wall
- Preconfigured Roof: change roof to: straight 2x6s , 6x6 posts or angled 2x6s
- Roof Brackets Type: RAFTER/INSERT BRACKETS for 2x6 wood (60 total)
- Max Roof Brackets Count: 60
- More Info About Kit: This pergola brackets & hardware kit will accommodate any attached pergola ranging from 4-12 feet wide (attached to the house) by 13-24 feet deep (out from the house). The backyard pergola does not need to be exactly 12' x 24' like in the images on this page. The kit includes 28 2x6 rafter brackets so you can add 14 traditional roof rafters atop the beams of the pergola (7 rafters over each of the two roof sections, both a 12' span with standard spacing between rafters). It also includes 32 2x6 insert brackets so you can add two privacy walls with 8 slats each (both 8' tall with standard spacing between slats). If desired, you could reduce the number of slats on the privacy walls and use some of the insert brackets to add a side railing or another full/partial privacy wall. You can also purchase additional 2x6 insert brackets here .
- Preconfigured Spacing Level: MED SPACING
- Preconfigured Wall Count: 2 PRIVACY WALLS
- Preconfigured Roof Type: 2x6s ON BEAMS
- Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this steel bracket kit for building a wood-frame pergola, nor is the hardware you'll need to anchor the base brackets and wall mount brackets. Before you can build your wood pergola with black brackets, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 24' pergola that is 8' tall): Four (4) 8' long 6x6 posts Six (6) 12' long 6x6 posts Thirty-eight (38) 12' long 2x6 slats Anchoring hardware (24 pieces) The estimated cost for the above lumber and anchoring hardware is $1,118 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
- Preconfigured Bracket Size: FOR 6x6s + 2x6s
- Pre Key Info Blocks: 2-Block
- Pre Key Info Brackets: 6x6 Frame
- Pre Key Info Roof: Slatted Roof (2x6s Atop Beams)
- Pre Key Info Type: Wall-Mounted
- Pre Key Info Walls: + 2 Privacy Walls
Included in this Patio Pergola with Roof Kit:
-
4x base brackets (for 6x6 wood) - 2x wall-mount brackets (for 6x6 wood)
- 2x 3-arm post brackets (for 6x6 wood)
- 2x 4-arm post brackets (for 6x6 wood)
- 60x 2x6 insert brackets for 30 roof/wall slats (2x6 wood)
- Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- NOTE: Wood (lumber) and anchoring hardware for securing the base brackets and wall-mount brackets are NOT included and will need to be purchased locally
This patio pergola with roof kit will accommodate any wall-mounted pergola ranging from 4-12 feet wide (attached to the house) by 13-24 feet deep (out from the home). Click here to see a pergola kit with the dimensions flip-flopped.
The kit includes a total of 60 2x6 insert brackets. While the intent is that 28 of these brackets be used for adding 7 roof rafters to each of the 2 roof sections (12' span each with medium spacing) and the remaining 32 be used for two privacy walls with 8 slats each (both 8' height with medium spacing), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, increasing the number of slats in a roof/wall section, etc.). You can also purchase additional 2x6 insert brackets here.
Want a Smaller 4x4 Frame Instead?
Click here to see this same pre-configured patio pergola with roof kit but with smaller 4x4 wood posts and 2x4 roof and wall slats (instead of 6x6 wood posts and 2x6 roof and wall slats).
About Our Steel 6x6 Pergola Brackets:
- Made with premium quality steel
- Made of 12-gauge steel (~2.6mm thick)
- Laser-cut, bent and welded
- Advanced weather coating technology to withstand extreme weather conditions
- Pre-drilled holes for securing wood and accessories to brackets
- Made for dressed lumber commonly called 6x6s (actual dimensions are 5.5" x 5.5")
- Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- Reduces your pergola build time by as much as 75%
- Backed by our 5-year warranty
- Shipped directly to your doorstep from Boise, Idaho
Ask a question
