Specifications

• amazon bullet 1: Pergola kit includes: 4 base brackets, 4 3-arm post brackets and 18 insert brackets (all for 4x4" wood posts) + stainless steel screws
• amazon bullet 2: Freestanding pergola can be any size up to 12 feet wide x 12 feet deep x 10 feet tall
• amazon bullet 3: About our steel brackets: 1) 14-gauge steel (approximately 2mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 4: The 18 insert brackets allow you to add 9 square 4x4 roof rafters to your pergola
• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets to a secure base not included
• Assembled Height Ft: 8
• Assembled Length Ft: 12
• Assembled Width Ft: 12
• coverage area sqft: 144
• Required Lumber: As noted above, wood (lumber) is NOT included in this pergola bracket kit (nor is the hardware you'll need to anchor the base brackets).Before you can build your pergola, you'll need to purchase the following items from a local building supply store or lumber yard:- Four (4) 8' long 4x4 posts- Thirteen (13) 12' long 4x4 posts- Anchoring hardware (16 pieces)The estimated cost* for the above lumber and anchoring hardware is $579. Together with the cost of this Zen Pergolas bracket kit, your estimated total all-in cost for your pergola is $1208.*Estimate only - Actual cost will vary depending on the type of wood you buy, your location, local stores & availability and various other factors.
• Text Over Image - Dark: lumber not included
• Preconfigured Slat Spacing: between the roof slats / rafters (see kit w/ far or medium spacing) between roof slats (see far or med spacing)
• Preconfigured Privacy Walls: see this same kit with a privacy wall see kit with a privacy wall
• Preconfigured Roof: change roof to: canopy , straight 2x4s , 2x4s atop beams or angled 2x4s
• Roof Brackets Type: INSERT BRACKETS for 4x4 wood
• Max Roof Brackets Count: 18
• More Info About Kit: This DIY patio pergola bracket kit will accommodate any free-standing pergola ranging from 4-12 feet wide by 4-12 feet deep . The over-the-patio pergola does not need to be exactly 12' x 12' like in the images on this page. The kit includes 18 4x4 insert brackets . While the images on this page show that all 18 brackets are used to add 9 square inline 4x4 roof rafters to your pergola (covering a span of 12' with closely-spaced rafters), you can use the brackets any way you'd like (i.e. adding a privacy wall or half/partial wall, adding a side railing, etc.). You can also purchase additional 4x4 insert brackets here .
• Preconfigured Spacing Level: CLOSE SPACING
• Preconfigured Wall Count: 0 PRIVACY WALLS
• Preconfigured Roof Type: INLINE 4x4 POSTS
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this 1-section small pergola kit, nor is the hardware you'll need to anchor the base brackets to a secure foundation. Before you can build your patio shade pergola, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 12' pergola that is 8' tall): Four (4) 8' long 4x4 posts Thirteen (13) 12' long 4x4 posts Anchoring hardware (16 pieces) The estimated cost for the above lumber and anchoring hardware is $579 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• Preconfigured Bracket Size: 4x4 BRACKETS
• Pre Key Info Blocks: 1-Block
• Pre Key Info Brackets: 4x4 Frame
• Pre Key Info Roof: Slatted Roof (Inline 4x4 Posts)
• Pre Key Info Type: Freestanding