Free-Standing 18' x 10' Pergola with Roof - Kit for 6x6 Wood Posts
About this Pergola Kit Configuration:
- Type: Free-standing (see the attached version of this kit)
- Dimensions: 18' x 10' with the roof slats running the 18' width (see the reversed 10x18 kit with the roof slats running the 10' length instead)
- Bracket size: 6x6 (see the smaller 4x4 version of this kit)
- Roof style: Your choice of 4 roof styles (straight inline, traditional, square posts or angled slats) with 3 slat spacing options for each (far, medium or close)
Want something completely different? Use our easy design tool to create your own pergola configuration.
Included in this Free-Standing 18 x 10 Pergola Kit:
- 6x base brackets (for 6x6 wood)
- 4x 3-arm post brackets (for 6x6 wood)
- 2x 4-arm post brackets (for 6x6 wood)
- 8-52x roof brackets for your choice of roof kits as selected above ⤴
- Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- NOTE: Wood (lumber) and anchoring hardware for securing the base brackets to a solid foundation are NOT included and will need to be purchased locally
Click here to see optional add-ons such as privacy walls, side railings, and corner supports for this stand-alone 18' x 10' pergola with roof.
Please note that the images above show a 24' x 12' pergola (rather than an 18' wide x 10' deep pergola, for which the kit on this page is intended). The number of roof rafters/slats will differ from what is pictured above since the two roof sections are only intended to span the pergola's 10-foot depth. That said, the spacing between slats/rafters will be very similar to what is shown above.
The roof rafters on this pergola are intended to run longways (as shown in the pictures above). If you want the roof rafters to run the opposite direction, you'll want this pergola kit instead.
Want a Smaller 4x4 Frame Instead?
Click here to see this same 18' x 10' pergola kit with roof but with a smaller frame for 4x4 wood posts (instead of 6x6 wood posts).
About Our Steel 6x6 Pergola Brackets:
- 12-gauge steel (approximately 2.6mm thick)
- Laser-cut, bent and welded
- Advanced weather coating technology to withstand extreme weather conditions
- Pre-drilled holes for securing wood and accessories to brackets
- Made for dressed lumber commonly called 6x6s (actual dimensions are 5.5" x 5.5")
- Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- Reduces your pergola build time by as much as 75%
- Backed by our 5-year warranty
- Shipped directly to your doorstep from Boise, Idaho
Need help ordering?
What's Not Included?
Wood. Wood is a) very expensive to ship and b) readily available to most people at local home improvement and building supply stores. By buying your wood locally, you also have more options on the exact type of wood you'd like that is appropriate for your area's climate.
Anchoring Hardware. While this pergola kit does include stainless steel wood screws for securing 6x6" wood posts into the brackets, it does not include anchoring hardware for securing the base brackets into a secure base (i.e. cement pad, deck, landscape toppers, concrete footing, etc.). This is because the anchoring hardware you need will vary based on a) what type of material you're going into and b) local building codes.
Required Lumber & Estimated Total Cost
Assembling a Zen Pergola is quite easy (even for novices) and only requires basic tools. Following these simple instructions, it should only take 2-3 hours for you and a helper to assemble your pergola.
We stand behind our products! We will gladly replace any bracket that breaks, cracks, chips or corrodes within 5 years of purchase. Read more about our 5-year limited warranty.
Click here to learn about splitting your purchase up into 4 interest-free payments OR financing your order over up to 36 months.