Specifications

• amazon bullet 2: Freestanding pergola can be any size up to 12 feet wide x 12 feet deep x 10 feet tall
• amazon bullet 3: About our steel brackets: 1) 14-gauge steel (approximately 2mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets to a secure base not included
• Assembled Height Ft: 8
• Assembled Length Ft: 12
• Assembled Width Ft: 36
• coverage area sqft: 144
• Preconfigured Roof Type: 3 CANOPIES
• Preconfigured Spacing Level: MED SPACING
• Preconfigured Wall Count: 1 PRIVACY WALL
• Text Over Image - Dark: lumber not included
• Max Roof Brackets Count: 24
• More Info About Kit: This deck-mounted privacy pergola kit will accommodate any attached pergola ranging from 26-36 feet (attached to house) by 8-12 feet (out from the wall). The house-attached shade pergola anchored to the deck does not need to be exactly 36' x 12' like in the images on this page. The kit includes three (3) premium quality charcoal gray shade canopies in your choice of 6 size options: 8x8, 8x10, 8x12, 10x10, 10x12 or 12x12. The canopies are made of fade-resistant 180 GSM High-Density Polyethylene (HDPE) knitted fabric that blocks up to 95% of UV rays and is permeable to prevent rain from pooling on top. Each side of the canopies has 4 straps to keep them tight and prevent drooping. The kit also includes 36 corner and side accessory mounts (including screws) to secure the shade canopy straps to the corner brackets and beams of the pergola. The kit also includes 24 2x4 insert brackets . While the images on this page show that all 24 brackets are used to add one privacy wall with 12 slats ( 8' tall with standard spacing between slats), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, adding roof rafters below the shade canopies, etc.). You can also purchase additional 2x4 insert brackets here .
• Preconfigured Privacy Walls: see this same kit without a privacy wall or with 2 or 3 privacy walls see kit without a wall or w/ 2 or 3 privacy walls
• Preconfigured Roof: change roof to: straight 2x4s , 2x4s atop beams , 4x4 posts or angled 2x4s
• Preconfigured Slat Spacing: between privacy wall slats (see kit w/ far or close spacing) between wall slats (see far or close spacing)
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this DIY kit for building a wooden privacy pergola, nor is the hardware you'll need to anchor the base brackets and wall-mount brackets. Before you can build your wood/cedar covered pergola, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 36' wide (attached to house) by 12' deep (out from the house) pergola that is 8' tall): Four (4) 8' long 4x4 posts Seven (7) 12' long 4x4 posts Twelve (12) 12' long 2x4 slats Anchoring hardware (16 pieces for base brackets + 16 pieces for wall mount brackets) The estimated cost for the above lumber and anchoring hardware is $493 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• Roof Brackets Type: INSERT BRACKETS for 2x4 wood wall slats
• Preconfigured Bracket Size: FOR 4x4s + 2x4s
• Pre Key Info Blocks: 3-Block
• Pre Key Info Brackets: 4x4 Frame
• Pre Key Info Roof: 3-Canopy Roof
• Pre Key Info Type: Wall-Mounted
• Pre Key Info Walls: + 1 Privacy Wall