
Bracket Kit for Building a Pergola Structure
⬩ Freestanding 4-Block pergola with a 6x6 Frame
⬩ Slatted Roof (Angled 2x6s) + 2 Privacy Walls
About this Pergola Kit Configuration:
- Type: Free-standing (see the attached version of this kit)
- Bracket size: 6x6 (see the smaller 4x4 version of this kit)
- Roof style: Angled slats (see this same kit with an inline, traditional, or square posts roof)
- Privacy wall(s): 2 (see this same kit with 0 or 1 privacy wall)
- Roof/wall slat spacing: Medium (see this same kit with far or close spacing)
Want something completely different? Use our easy design tool to create your own pergola configuration.
Included in this DIY Freestanding Pergola Kit:
-
9x base brackets (for 6x6 wood) - 4x 3-arm post brackets (for 6x6 wood)
- 4x 4-arm post brackets (for 6x6 wood)
- 1x 5-arm post bracket (for 6x6 wood)
- 148x 2x6 insert brackets for 74 roof/wall slats (2x6 wood)
- Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- NOTE: Wood (lumber) and anchoring hardware for securing the base brackets to a solid foundation are NOT included and will need to be purchased locally
This pergola bracket kit will accommodate any DIY freestanding pergola ranging from 13-24 feet by 13-24 feet. The pergola does not need to be the exact dimensions shown in the images on this page.
The Do-It-Yourself-friendly kit includes a total of 148 2x6 insert brackets. While the intent is that 104 of these brackets be used to add 13 angled roof slats to each of the pergola's 4 roof sections (12' span each with medium spacing) and the remaining 44 be used for two privacy walls with 11 angled slats each (both 8' height with medium spacing), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, increasing the number of slats in a roof/wall section, etc.). You can also purchase additional 2x6 insert brackets here.
Want a Smaller 4x4 Frame Instead?
Click here to see this same DIY freestanding pergola kit but for smaller 4x4 wood posts and 2x4 roof and wall slats (instead of 6x6 wood posts and 2x6 roof and wall slats).
About Our Steel 6x6 Pergola Brackets:
- Made with premium quality steel
- Made of 12-gauge steel (~2.6mm thick)
- Laser-cut, bent and welded
- Advanced weather coating technology to withstand extreme weather conditions
- Pre-drilled holes for securing wood and accessories to brackets
- Made for dressed lumber commonly called 6x6s (actual dimensions are 5.5" x 5.5")
- Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- Reduces your pergola build time by as much as 75%
- Backed by our 5-year warranty
- Shipped directly to your doorstep from Boise, Idaho
Specifications
- amazon bullet 1: Pergola kit includes: 9 base brackets, 4 3-arm post brackets, 4 4-arm post brackets and 1 5-arm post bracket (all for 6x6" wood posts) + 148 insert brackets for 2x6" wood slats + stainless steel screws (and screw caps) + complimentary drill bits
- amazon bullet 2: Freestanding pergola can be any size up to 24 feet x up to 24 feet (and 8-10 feet tall)
- amazon bullet 3: About our steel brackets: 1) 12-gauge steel (approximately 2.6mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
- amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets to a secure base not included
- amazon bullet 4: The 148 insert brackets allow you to add 52 2x6 angled roof slats to your pergola (13 slats per roof quadrant) + 2 privacy walls with 11 2x6 slats each
- coverage area sqft: 576
- Assembled Height Ft: 8
- Assembled Width Ft: 24
- Assembled Length Ft: 24
- Required Lumber: As noted above, wood (lumber) is NOT included in this pergola bracket kit (nor is the hardware you'll need to anchor the base brackets).Before you can build your pergola, you'll need to purchase the following items from a local building supply store or lumber yard:- Nine (9) 8' long 6x6 posts- Twelve (12) 12' long 6x6 posts- Seventy-four (74) 12' long 2x6 slats- Anchoring hardware (36 pieces)The estimated cost* for the above lumber and anchoring hardware is $2238. Together with the cost of this Zen Pergolas bracket kit, your estimated total all-in cost for your pergola is $6437.*Estimate only - Actual cost will vary depending on the type of wood you buy, your location, local stores & availability and various other factors.
- Text Over Image - Dark: lumber not included
- Preconfigured Spacing Level: MED SPACING
- Preconfigured Wall Count: 2 PRIVACY WALLS
- Preconfigured Roof Type: ANGLED 2x6s
- Preconfigured Slat Spacing: between the roof and wall slats (see kit w/ far or close spacing) between roof/wall slats (see far or close spacing)
- Preconfigured Privacy Walls: see this same kit with no privacy wall or with 1 privacy wall see kit w/ no walls or w/ 1 privacy wall
- Preconfigured Roof: change roof to: canopies , straight 2x6s , 2x6s atop beams or 6x6 posts
- Roof Brackets Type: INSERT BRACKETS for 2x6 wood
- Max Roof Brackets Count: 148
- More Info About Kit: This 4-block large pergola DIY kit will accommodate any free-standing pergola ranging from 13-24 feet by 13-24 feet . The over-patio/deck shade structure does not need to be exactly 24' x 24' like in the images on this page. The kit includes 148 2x6 insert brackets . While the images on this page show that 104 of these brackets are used to add 52 angled roof slats to your pergola (13 slats to each of the four roof sections, all a 12' span with standard spacing between slats) and the remaining 44 brackets are used to add two privacy walls with 11 angled slats each (both 8' tall with standard spacing between slats), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, installing the roof rafters and/or wall slats straight up & down, etc.). You can also purchase additional 2x6 insert brackets here .
- Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this Do-It-Yourself kit for building a big backyard pergola, nor is the hardware you'll need to anchor the base brackets to a secure foundation. Before you can build your backyard shade structure, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 24' x 24' pergola that is 8' tall): Nine (9) 8' long 6x6 posts Twelve (12) 12' long 6x6 posts Seventy-four (74) 12' long 2x6 slats Anchoring hardware (36 pieces) The estimated cost for the above lumber and anchoring hardware is $2,238 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
- Preconfigured Bracket Size: FOR 6x6s + 2x6s
- Pre Key Info Blocks: 4-Block
- Pre Key Info Brackets: 6x6 Frame
- Pre Key Info Roof: Slatted Roof (Angled 2x6s)
- Pre Key Info Type: Freestanding
- Pre Key Info Walls: + 2 Privacy Walls
About this Pergola Kit Configuration:
- Type: Free-standing (see the attached version of this kit)
- Bracket size: 6x6 (see the smaller 4x4 version of this kit)
- Roof style: Angled slats (see this same kit with an inline, traditional, or square posts roof)
- Privacy wall(s): 2 (see this same kit with 0 or 1 privacy wall)
- Roof/wall slat spacing: Medium (see this same kit with far or close spacing)
Want something completely different? Use our easy design tool to create your own pergola configuration.
Included in this DIY Freestanding Pergola Kit:
-
9x base brackets (for 6x6 wood) - 4x 3-arm post brackets (for 6x6 wood)
- 4x 4-arm post brackets (for 6x6 wood)
- 1x 5-arm post bracket (for 6x6 wood)
- 148x 2x6 insert brackets for 74 roof/wall slats (2x6 wood)
- Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- NOTE: Wood (lumber) and anchoring hardware for securing the base brackets to a solid foundation are NOT included and will need to be purchased locally
This pergola bracket kit will accommodate any DIY freestanding pergola ranging from 13-24 feet by 13-24 feet. The pergola does not need to be the exact dimensions shown in the images on this page.
The Do-It-Yourself-friendly kit includes a total of 148 2x6 insert brackets. While the intent is that 104 of these brackets be used to add 13 angled roof slats to each of the pergola's 4 roof sections (12' span each with medium spacing) and the remaining 44 be used for two privacy walls with 11 angled slats each (both 8' height with medium spacing), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, increasing the number of slats in a roof/wall section, etc.). You can also purchase additional 2x6 insert brackets here.
Want a Smaller 4x4 Frame Instead?
Click here to see this same DIY freestanding pergola kit but for smaller 4x4 wood posts and 2x4 roof and wall slats (instead of 6x6 wood posts and 2x6 roof and wall slats).
About Our Steel 6x6 Pergola Brackets:
- Made with premium quality steel
- Made of 12-gauge steel (~2.6mm thick)
- Laser-cut, bent and welded
- Advanced weather coating technology to withstand extreme weather conditions
- Pre-drilled holes for securing wood and accessories to brackets
- Made for dressed lumber commonly called 6x6s (actual dimensions are 5.5" x 5.5")
- Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- Reduces your pergola build time by as much as 75%
- Backed by our 5-year warranty
- Shipped directly to your doorstep from Boise, Idaho
Ask a question