About this Pergola Kit Configuration:

Type: Free-standing (see the attached version of this kit)
Bracket size: 6x6 (see the smaller 4x4 version of this kit)
Roof style: Angled slats (see this same kit with an inline, traditional, or square posts roof)
Privacy wall(s): 1 (see this same kit with 0, 2 or 3 privacy walls)
Roof/wall slat spacing: Far (see this same kit with medium or close spacing)

Want something completely different? Use our easy design tool to create your own pergola configuration.

Included in this Brackets Kit for a Wood Pergola with Roof:

8x base brackets (for 6x6 wood)
4x 3-arm post brackets (for 6x6 wood)
4x 4-arm post brackets (for 6x6 wood)
82x 2x6 insert brackets for 41 roof/wall slats (2x6 wood)
Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
NOTE: Wood (lumber) and anchoring hardware for securing the base brackets to a solid foundation are NOT included and will need to be purchased locally

This brackets kit for a wood pergola with roof will accommodate any stand-alone pergola ranging from 25-36 feet by 4-12 feet. The pergola does not need to be the exact dimensions shown in the images on this page.

The kit includes a total of 82 2x6 insert brackets. While the intent is that 66 of these brackets be used for adding 11 angled 2x6 roof slats to each of the 3 roof sections (12' span each with far slat spacing) and the remaining 16 be used for one privacy wall with 8 slats (8' height with far slat spacing), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, increasing the number of slats in a roof/wall section, etc.). You can also purchase additional 2x6 insert brackets here.

Want a Smaller 4x4 Frame Instead?

Click here to see this same pre-configured brackets kit for a wood pergola with roof but with smaller 4x4 wood posts and 2x4 roof and wall slats (instead of 6x6 wood posts and 2x6 roof and wall slats).

About Our Steel 6x6 Pergola Brackets:

Proudly made in the USA with premium American steel
Made of 12-gauge steel (~2.6mm thick)
Laser-cut, bent and welded
Advanced weather coating technology to withstand extreme weather conditions
Pre-drilled holes for securing wood and accessories to brackets
Made for dressed lumber commonly called 6x6s (actual dimensions are 5.5" x 5.5")
Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
Reduces your pergola build time by as much as 75%
Backed by our 5-year warranty
Shipped directly to your doorstep from Boise, Idaho

Bracket Kit for Building a Wood Pergola With Roof - Any Size Up to 36' x 12'

⬩ Wall-Mounted 3-Block pergola with a 6x6 frame

⬩ Slatted Roof (Angled 2x6s) + 1 Privacy Wall

Customization Options: