Specifications

• amazon bullet 1: Pergola kit includes: 2 base brackets, 2 wall-mount brackets and 2 3-arm post brackets (all for 6x6" wood posts) + 22 insert brackets for 2x6" wood slats + stainless steel screws (and screw caps) + complimentary drill bits
• amazon bullet 2: Attached pergola can be any size up to 12 feet wide (attached to the house), up to 12 feet deep (out from the house) and up to 10 feet tall
• amazon bullet 3: About our steel brackets: 1) 12-gauge steel (approximately 2.6mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 4: The 22 insert brackets allow you to add 11 2x6 angled roof slats to your pergola
• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets and wall-mount brackets not included
• Assembled Height Ft: 8
• Assembled Length Ft: 12
• Assembled Width Ft: 12
• coverage area sqft: 144
• Required Lumber: As noted above, wood (lumber) is NOT included in this pergola bracket kit (nor is the hardware you'll need to anchor the base and wall-mount brackets).Before you can build your pergola, you'll need to purchase the following items from a local building supply store or lumber yard:- Two (2) 8' long 6x6 posts- Three (3) 12' long 6x6 posts- Eleven (11) 12' long 2x6 slats- Anchoring hardware (16 pieces)The estimated cost* for the above lumber and anchoring hardware is $475. Together with the cost of this Zen Pergolas bracket kit, your estimated total all-in cost for your pergola is $1274.*Estimate only - Actual cost will vary depending on the type of wood you buy, your location, local stores & availability and various other factors.
• Text Over Image - Dark: lumber not included
• Preconfigured Slat Spacing: between the roof slats / rafters (see kit w/ medium or close spacing) between roof slats (see med or close spacing)
• Preconfigured Privacy Walls: see this same kit with a privacy wall see kit with a privacy wall
• Preconfigured Roof: change roof to: canopy , straight 2x6s , 2x6s atop beams or 6x6 posts
• Roof Brackets Type: INSERT BRACKETS for 2x6 wood
• Max Roof Brackets Count: 22
• More Info About Kit: This bracket kit for a 2-post pergola will accommodate any attached pergola ranging from 4-12 feet wide by 4-12 feet deep . The pergola with a roof does not need to be exactly 12' x 12' like in the images on this page. The kit includes 22 2x6 insert brackets . While the images on this page show that all 22 brackets are used to add 11 angled roof slats to your pergola (covering a span of 12' with far spacing between slats), you can use the brackets any way you'd like (i.e. adding a privacy wall or half/partial wall, adding a side railing, installing the roof slats straight up & down, etc.). You can also purchase additional 2x6 insert brackets here .
• Preconfigured Spacing Level: FAR SPACING
• Preconfigured Wall Count: 0 PRIVACY WALLS
• Preconfigured Roof Type: ANGLED 2x6s
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this 2-post pergola hardware kit, nor is the hardware you'll need to anchor the base brackets and wall mount brackets. Before you can build your pergola with roof shade, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 12' pergola that is 8' tall): Two (2) 8' long 6x6 posts Three (3) 12' long 6x6 posts Eleven (11) 12' long 2x6 slats Anchoring hardware (16 pieces) The estimated cost for the above lumber and anchoring hardware is $475 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• Preconfigured Bracket Size: FOR 6x6s + 2x6s
• Pre Key Info Blocks: 1-Block
• Pre Key Info Brackets: 6x6 Frame
• Pre Key Info Roof: Slatted Roof (Angled 2x6s)
• Pre Key Info Type: Wall-Mounted