Specifications

• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets and wall-mount brackets not included
• amazon bullet 3: About our steel brackets: 1) 14-gauge steel (approximately 2mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 1: Pergola kit includes: 2 base brackets, 2 wall-mount brackets and 2 3-arm post brackets (all for 4x4" wood posts) + 14 insert brackets for 2x4" wood slats + stainless steel screws (and screw caps) + complimentary drill bits
• amazon bullet 4: The 14 insert brackets allow you to add 7 2x4 roof rafters to your pergola
• amazon bullet 2: Attached pergola can be any size up to 12 feet wide (attached to the house), up to 12 feet deep (out from the house) and up to 10 feet tall
• coverage area sqft: 144
• Assembled Height Ft: 8
• Assembled Width Ft: 12
• Assembled Length Ft: 12
• Required Lumber: As noted above, wood (lumber) is NOT included in this pergola bracket kit (nor is the hardware you'll need to anchor the base brackets and wall-mount brackets).Before you can build your pergola, you'll need to purchase the following items from a local building supply store or lumber yard:- Two (2) 8' long 4x4 posts- Three (3) 12' long 4x4 posts- Seven (7) 12' long 2x4 slats- Anchoring hardware (16 pieces)The estimated cost* for the above lumber and anchoring hardware is $237. Together with the cost of this Zen Pergolas bracket kit, your estimated total all-in cost for your pergola is $636.*Estimate only - Actual cost will vary depending on the type of wood you buy, your location, local stores & availability and various other factors.
• Text Over Image - Dark: lumber not included
• Preconfigured Slat Spacing: between the roof slats / rafters (see kit w/ far or close spacing) between roof slats (see far or close spacing)
• Preconfigured Privacy Walls: see this same kit with a privacy wall see kit with a privacy wall
• Preconfigured Roof: change roof to: canopy , 2x4s atop beams , 4x4 posts or angled 2x4s
• Roof Brackets Type: INSERT BRACKETS for 2x4 wood
• Max Roof Brackets Count: 14
• More Info About Kit: This bracket kit for a 2-post pergola will accommodate any attached pergola ranging from 4-12 feet wide by 4-12 feet deep . The 2-post wood pergola does not need to be exactly 12' x 12' like in the images on this page. The kit includes 14 2x4 insert brackets . While the images on this page show that all 14 brackets are used to add 7 straight inline roof rafters to your pergola (covering a span of 12' with standard spacing between rafters), you can use the brackets any way you'd like (i.e. adding a privacy wall or half/partial wall, adding a side railing, installing the roof slats at an angle, etc.). You can also purchase additional 2x4 insert brackets here .
• Preconfigured Spacing Level: MED SPACING
• Preconfigured Wall Count: 0 PRIVACY WALLS
• Preconfigured Roof Type: STRAIGHT 2x4s
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this 2-post pergola hardware kit, nor is the hardware you'll need to anchor the base brackets and wall mount brackets. Before you can build your wall-mount pergola, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 12' pergola that is 8' tall): Two (2) 8' long 4x4 posts Three (3) 12' long 4x4 posts Seven (7) 12' long 2x4 slats Anchoring hardware (16 pieces) The estimated cost for the above lumber and anchoring hardware is $237 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• Preconfigured Bracket Size: FOR 4x4s + 2x4s
• Pre Key Info Blocks: 1-Block
• Pre Key Info Brackets: 4x4 Frame
• Pre Key Info Roof: Slatted Roof (Straight Inline 2x4s)
• Pre Key Info Type: Wall-Mounted