Specifications

• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets and wall-mount brackets not included
• amazon bullet 3: About our steel brackets: 1) 12-gauge steel (approximately 2.6mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 2: Attached pergola can be any size up to 12 feet wide (attached to the house), up to 12 feet deep (out from the house) and up to 10 feet tall
• amazon bullet 1: Pergola kit includes: 2 base brackets, 2 wall-mount brackets and 2 3-arm post brackets (all for 6x6" wood posts) + 48 insert brackets for 2x6" wood slats + stainless steel screws (and screw caps) + complimentary drill bits
• amazon bullet 4: The 48 insert brackets allow you to add 13 2x6 angled roof slats to your pergola + a privacy wall with 11 2x6 slats
• Assembled Height Ft: 8
• Assembled Width Ft: 12
• Assembled Length Ft: 12
• coverage area sqft: 144
• Required Lumber: As noted above, wood (lumber) is NOT included in this pergola bracket kit (nor is the hardware you'll need to anchor the base and wall-mount brackets).Before you can build your pergola, you'll need to purchase the following items from a local building supply store or lumber yard:- Two (2) 8' long 6x6 posts- Three (3) 12' long 6x6 posts- Twenty-four (24) 12' long 2x6 slats- Anchoring hardware (16 pieces)The estimated cost* for the above lumber and anchoring hardware is $624. Together with the cost of this Zen Pergolas bracket kit, your estimated total all-in cost for your pergola is $1823.*Estimate only - Actual cost will vary depending on the type of wood you buy, your location, local stores & availability and various other factors.
• Text Over Image - Dark: lumber not included
• Preconfigured Slat Spacing: between the roof and wall slats (see kit w/ far or close spacing) between roof/wall slats (see far or close spacing)
• Preconfigured Privacy Walls: see this same kit without a privacy wall see kit without a privacy wall
• Preconfigured Roof: change roof to: canopy , straight 2x6s , 2x6s atop beams or 6x6 posts
• Roof Brackets Type: INSERT BRACKETS for 2x6 wood
• Max Roof Brackets Count: 48
• More Info About Kit: This DIY patio pergola bracket kit will accommodate any attached pergola ranging from 4-12 feet wide by 4-12 feet deep . The outdoor privacy pergola does not need to be exactly 12' x 12' like in the images on this page. The kit includes 48 2x6 insert brackets . While the images on this page show that 26 of these brackets are used to add 13 angled roof slats (covering a span of 12' with standard spacing between slats) and the remaining 22 brackets are used to add one privacy wall with 11 angled slats (8' tall with standard spacing between slats), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, installing the roof rafters and/or wall slats straight up & down, etc.). You can also purchase additional 2x6 insert brackets here .
• Preconfigured Spacing Level: MED SPACING
• Preconfigured Wall Count: 1 PRIVACY WALL
• Preconfigured Roof Type: ANGLED 2x6s
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this outdoor-friendly pergola bracket kit, nor is the hardware you'll need to anchor the base brackets and wall mount brackets. Before you can build your outside oasis pergola, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 12' pergola that is 8' tall): Two (2) 8' long 6x6 posts Three (3) 12' long 6x6 posts Twenty-four (24) 12' long 2x6 slats Anchoring hardware (16 pieces) The estimated cost for the above lumber and anchoring hardware is $624 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• Preconfigured Bracket Size: FOR 6x6s + 2x6s
• Pre Key Info Blocks: 1-Block
• Pre Key Info Brackets: 6x6 Frame
• Pre Key Info Roof: Slatted Roof (Angled 2x6s)
• Pre Key Info Type: Wall-Mounted
• Pre Key Info Walls: + 1 Privacy Wall