Patio or Pool Deck Pergola Kit
⬩ Freestanding 3-Block pergola with a 4x4 Frame
⬩ Slatted Roof (2x4s Atop Beams) + 2 Privacy Walls
About this Pergola Kit Configuration:
- Type: Free-standing (see the attached version of this kit)
- Bracket size: 4x4 (see the larger 6x6 version of this kit)
- Dimensions: Up to 12' wide x 36' deep (see the inverse up to 36' wide x 12' deep version of this kit)
- Roof style: Traditional w/ rafters atop beams (see this same kit with an inline, square posts or angled slats roof)
- Privacy wall(s): 2 (see this same kit with 0, 1 or 3 privacy walls)
- Roof/wall slat spacing: Medium (see this same kit with far or close spacing)
Want something completely different? Use our easy design tool to create your own pool deck pergola configuration.
Included in this Pool Deck Pergola Kit:
-
8x base brackets (for 4x4 wood) - 4x 3-arm post brackets (for 4x4 wood)
- 4x 4-arm post brackets (for 4x4 wood)
- 28x 2x4 rafter brackets for 7 roof rafters (2x4 wood)
- 52x 2x4 insert brackets for 26 wall slats (2x4 wood)
- Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- NOTE: Wood (lumber) and anchoring hardware for securing the base brackets to a solid foundation are NOT included and will need to be purchased locally
This pool deck pergola kit with roof + 2 walls will accommodate any free-standing pergola ranging from 25-36 feet by 4-12 feet. The pergola does not need to be the exact dimensions shown in the images on this page.
The kit includes 28 2x4 rafter brackets so you can add 7 traditional roof rafters that cover all 3 roof sections and run longways (12' width with medium slat spacing). These rafters sit atop the beams and can be installed with or without overhangs. If you would like to space the rafters closer together, you can purchase additional 2x4 rafter brackets here. If you're wanting this same pre-configured pergola except with the roof rafters running the other direction (i.e. rotated 90 degrees so each roof section has 7 separate rafters), click here.
The pergola kit also includes 52 2x4 insert brackets. While the intent is that all 52 of these insert brackets be used to add 2 privacy walls with 13 2x4 slats each (both 8' height with medium slat spacing), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, etc.). You can also purchase additional 2x4 insert brackets here.
About Our Steel 4x4 Pergola Brackets:
- Made with premium quality steel
- Made of 14-gauge steel (~2.0mm thick)
- Laser-cut, bent and welded
- Advanced weather coating technology to withstand extreme weather conditions
- Pre-drilled holes for securing wood and accessories to brackets
- Made for dressed lumber commonly called 4x4s (actual dimensions are 3.5" x 3.5")
- Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- Reduces your pergola build time by as much as 75%
- Backed by our 5-year warranty
- Shipped directly to your doorstep from Boise, Idaho
About this Pergola Kit Configuration:
- Type: Free-standing (see the attached version of this kit)
- Bracket size: 4x4 (see the larger 6x6 version of this kit)
- Dimensions: Up to 12' wide x 36' deep (see the inverse up to 36' wide x 12' deep version of this kit)
- Roof style: Traditional w/ rafters atop beams (see this same kit with an inline, square posts or angled slats roof)
- Privacy wall(s): 2 (see this same kit with 0, 1 or 3 privacy walls)
- Roof/wall slat spacing: Medium (see this same kit with far or close spacing)
Want something completely different? Use our easy design tool to create your own pool deck pergola configuration.
Included in this Pool Deck Pergola Kit:
-
8x base brackets (for 4x4 wood)
- 4x 3-arm post brackets (for 4x4 wood)
- 4x 4-arm post brackets (for 4x4 wood)
- 28x 2x4 rafter brackets for 7 roof rafters (2x4 wood)
- 52x 2x4 insert brackets for 26 wall slats (2x4 wood)
- Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- NOTE: Wood (lumber) and anchoring hardware for securing the base brackets to a solid foundation are NOT included and will need to be purchased locally
This pool deck pergola kit with roof + 2 walls will accommodate any free-standing pergola ranging from 25-36 feet by 4-12 feet. The pergola does not need to be the exact dimensions shown in the images on this page.
The kit includes 28 2x4 rafter brackets so you can add 7 traditional roof rafters that cover all 3 roof sections and run longways (12' width with medium slat spacing). These rafters sit atop the beams and can be installed with or without overhangs. If you would like to space the rafters closer together, you can purchase additional 2x4 rafter brackets here. If you're wanting this same pre-configured pergola except with the roof rafters running the other direction (i.e. rotated 90 degrees so each roof section has 7 separate rafters), click here.
The pergola kit also includes 52 2x4 insert brackets. While the intent is that all 52 of these insert brackets be used to add 2 privacy walls with 13 2x4 slats each (both 8' height with medium slat spacing), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, etc.). You can also purchase additional 2x4 insert brackets here.
About Our Steel 4x4 Pergola Brackets:
- Made with premium quality steel
- Made of 14-gauge steel (~2.0mm thick)
- Laser-cut, bent and welded
- Advanced weather coating technology to withstand extreme weather conditions
- Pre-drilled holes for securing wood and accessories to brackets
- Made for dressed lumber commonly called 4x4s (actual dimensions are 3.5" x 3.5")
- Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- Reduces your pergola build time by as much as 75%
- Backed by our 5-year warranty
- Shipped directly to your doorstep from Boise, Idaho