Free-Standing Pergola Kit for 4x4 Wood Posts (Any Size Up to 24' x 24') - With Traditional Roof Rafters + 2 Privacy Walls (Medium Spacing)
Included in this Pergola Kit with Roof + 2 Privacy Walls:
- 9x base brackets (for 4x4 wood)
- 4x 3-arm post brackets (for 4x4 wood)
- 4x 4-arm post brackets (for 4x4 wood)
- 1x 5-arm post bracket (for 4x4 wood)
- 42x 2x4 rafter brackets for 14 traditional roof rafters (2x4 wood) running the full up-to-24' length/width
- 52x 2x4 insert brackets for 26 wall slats (2x4 wood)
- Stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- NOTE: Wood (lumber) and anchoring hardware for securing the base brackets to a solid foundation are NOT included and will need to be purchased locally
This pergola kit with roof + 2 walls will accommodate any free-standing pergola ranging from 13-24 feet by 13-24 feet. The pergola does not need to be the exact dimensions shown in the images on this page.
The DIY-friendly kit includes 42 2x4 rafter brackets, allowing you to add 14 traditional roof rafters running the pergola's full up-to-24-foot width (or up-to-24-foot depth). You can purchase additional 2x4 rafter brackets here to add more rafters. The kit also includes 52 2x4 insert brackets so you can add two privacy walls with 13 slats each (both 8' height with medium spacing). If desired, you could reduce the number of slats on the privacy wall(s) and use some of the insert brackets to add a side railing or another full/partial privacy wall. You can also purchase additional 2x4 insert brackets here.
Want a Larger 6x6 Frame?
Click here to see this same pergola kit with roof and 2 privacy walls but for larger 6x6 wood posts and 2x6 roof rafters and wall slats (instead of 4x4 wood posts and 2x4 roof rafters and wall slats).
About Our Steel 4x4 Pergola Brackets:
- 14-gauge steel (approximately 2mm thick)
- Laser-cut, bent and welded
- Advanced weather coating technology to withstand extreme weather conditions
- Pre-drilled holes for securing wood and accessories to brackets
- Made for dressed lumber commonly called 4x4s (actual dimensions are 3.5" x 3.5")
- Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into brackets
- Reduces your pergola build time by as much as 75%
- Backed by our 5-year warranty
- Shipped directly to your doorstep from Boise, Idaho
Need help ordering?
What's Not Included?
Wood. Wood is a) very expensive to ship and b) readily available to most people at local home improvement and building supply stores. By buying your wood locally, you also have more options on the exact type of wood you'd like that is appropriate for your area's climate.
Anchoring Hardware. While this pergola kit does include stainless steel wood screws for securing 4x4" wood posts (and 2x4" wood slats) into the brackets, it does not include anchoring hardware for securing the base brackets into a secure base (i.e. cement pad, deck, landscape toppers, concrete footing, etc.). This is because the anchoring hardware you need will vary based on a) what type of material you're going into and b) local building codes.
Required Lumber & Estimated Total Cost
Assembling a Zen Pergola is quite easy (even for novices) and only requires basic tools. Following these simple instructions, it should only take 2-4 hours for you and a helper to assemble your pergola.
We stand behind our products! We will gladly replace any bracket that breaks, cracks, chips or corrodes within 5 years of purchase. Read more about our 5-year limited warranty.
Click here to learn about splitting your purchase up into 4 interest-free payments OR financing your order over up to 36 months.