Specifications

• amazon bullet 2: Freestanding pergola can be any size up to 12 feet wide x 12 feet deep x 10 feet tall
• amazon bullet 3: About our steel brackets: 1) 14-gauge steel (approximately 2mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets to a secure base not included
• Assembled Height Ft: 8
• Assembled Length Ft: 12
• Assembled Width Ft: 12
• coverage area sqft: 144
• Preconfigured Roof Type: SHADE CANOPY
• Preconfigured Spacing Level: CLOSE SPACING
• Preconfigured Wall Count: 1 PRIVACY WALL
• Text Over Image - Dark: lumber not included
• Preconfigured Slat Spacing: between privacy wall slats (see kit w/ far or medium spacing) between wall slats (see far or med spacing)
• Preconfigured Privacy Walls: see this same kit without a privacy wall or with a canvas privacy shade wall see kit without a wall or w/ a privacy shade
• Preconfigured Roof: change roof to: straight 2x6s , 2x6s atop beams , 6x6 posts or angled 2x6s
• Roof Brackets Type: INSERT BRACKETS for 2x6 wood wall slats
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this pergola brackets & cloth canopy combo kit, nor is the hardware you'll need to anchor the base brackets and wall mount brackets. Before you can build your covered shade pergola, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 12' pergola that is 8' tall): Two (2) 8' long 6x6 posts Three (3) 12' long 6x6 posts Fourteen (14) 12' long 2x6 slats Anchoring hardware (16 pieces) The estimated cost for the above lumber and anchoring hardware is $509 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• More Info About Kit: This kit for building a DIY wood pergola with a heavy-duty canvas canopy roof will accommodate any attached pergola ranging from 8-12 feet by 8-12 feet . The roof-shade pergola does not need to be exactly 12' x 12' like in the images on this page. The kit includes a premium quality charcoal gray shade canopy in your choice of 6 size options: 8x8, 8x10, 8x12, 10x10, 10x12 or 12x12. The canopy is made of fade-resistant 180 GSM High-Density Polyethylene (HDPE) knitted fabric that blocks up to 95% of UV rays and is permeable to prevent rain from pooling on top. Each side of the canopy has 4 straps to keep it tight and prevent drooping. The kit also includes all necessary corner and side accessory mounts (including screws) to secure the shade canopy straps to the corner brackets and beams of the pergola. The kit also includes 28 2x6 insert brackets . While the images on this page show that all 28 brackets are used to add one privacy wall with 14 slats (8' tall with closely spaced slats), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, adding roof rafters below the shade canopy, etc.). You can also purchase additional 2x6 insert brackets here .
• Max Roof Brackets Count: 28
• Preconfigured Bracket Size: FOR 6x6s + 2x6s
• Pre Key Info Blocks: 1-Block
• Pre Key Info Brackets: 6x6 Frame
• Pre Key Info Roof: Shade Canopy Roof
• Pre Key Info Type: Wall-Mounted
• Pre Key Info Walls: + 1 Privacy Wall