Specifications

• amazon bullet 1: Pergola kit includes: 4 base brackets, 2 wall-mount brackets, 2 3-arm post brackets and 2 4-arm post brackets (all for 4x4" wood posts) + 20 insert brackets for 2x4" wood slats + stainless steel screws (and screw caps) + complimentary drill bits
• amazon bullet 2: Attached pergola can be any size up to 12 feet wide (attached to the house), up to 24 feet deep (out from the house) and up to 10 feet tall
• amazon bullet 3: About our steel brackets: 1) 14-gauge steel (approximately 2mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 4: The 20 insert brackets allow you to add 10 2x4 roof rafters to your pergola (5 rafters per roof section)
• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets and wall-mount brackets not included
• Assembled Height Ft: 8
• Assembled Length Ft: 24
• Assembled Width Ft: 12
• coverage area sqft: 288
• Required Lumber: As noted above, wood (lumber) is NOT included in this pergola bracket kit (nor is the hardware you'll need to anchor the base brackets and wall-mount brackets).Before you can build your pergola, you'll need to purchase the following items from a local building supply store or lumber yard:- Four (4) 8' long 4x4 posts- Six (6) 12' long 4x4 posts- Ten (10) 12' long 2x4 slats- Anchoring hardware (24 pieces)The estimated cost* for the above lumber and anchoring hardware is $428. Together with the cost of this Zen Pergolas bracket kit, your estimated total all-in cost for your pergola is $1127.*Estimate only - Actual cost will vary depending on the type of wood you buy, your location, local stores & availability and various other factors.
• Text Over Image - Dark: lumber not included
• Preconfigured Slat Spacing: between the roof slats / rafters (see kit w/ medium or close spacing) between roof slats (see med or close spacing)
• Preconfigured Privacy Walls: see this same kit with 1 or 2 privacy walls see kit w/ 1 or 2 privacy walls
• Preconfigured Roof: change roof to: canopies , straight 2x4s , 4x4 posts or angled 2x4s
• Roof Brackets Type: RAFTER BRACKETS for 2x4 wood
• Max Roof Brackets Count: 20
• More Info About Kit: This DIY kit for a 4x4 wood frame pergola will accommodate any attached pergola ranging from 4-12 feet wide (attached to house) by 13-24 feet deep (out from the house). The pergola with a 4x4 wood post frame does not need to be exactly 12' x 24' like in the images on this page. The kit includes 20 2x4 rafter brackets . While the images on this page show that all 20 brackets are used to add 10 traditional roof rafters atop the beams of the pergola (5 rafters over each of the two roof sections, both a 12' span with far spacing between rafters), you can use the brackets any way you'd like . You can also purchase additional 2x4 rafter brackets here .
• Preconfigured Spacing Level: FAR SPACING
• Preconfigured Wall Count: 0 PRIVACY WALLS
• Preconfigured Roof Type: 2x4s ON BEAMS
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this 4x4 steel bracket kit, nor is the hardware you'll need to anchor the base brackets and wall mount brackets. Before you can build your bracket-strengthened pergola, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 12' pergola that is 8' tall): Four (4) 8' long 4x4 posts Six (6) 12' long 4x4 posts Ten (10) 12' long 2x4 slats Anchoring hardware (24 pieces) The estimated cost for the above lumber and anchoring hardware is $428 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• Preconfigured Bracket Size: FOR 4x4s + 2x4s
• Pre Key Info Blocks: 2-Block
• Pre Key Info Brackets: 4x4 Frame
• Pre Key Info Roof: Slatted Roof (2x4s Atop Beams)
• Pre Key Info Type: Wall-Mounted