Specifications

• amazon bullet 2: Freestanding pergola can be any size up to 12 feet wide x 12 feet deep x 10 feet tall
• amazon bullet 3: About our steel brackets: 1) 14-gauge steel (approximately 2mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets to a secure base not included
• Assembled Height Ft: 8
• Assembled Length Ft: 24
• Assembled Width Ft: 12
• coverage area sqft: 144
• Text Over Image - Dark: lumber not included
• Preconfigured Roof Type: 2 CANOPIES
• Preconfigured Wall Count: 2 SIDE SHADES
• Preconfigured Spacing Level: SPACING: N/A
• Max Roof Brackets Count: 2
• More Info About Kit: This DIY pergola kit for building a covered pergola with a privacy shade on 2 sides will accommodate any attached pergola ranging from 8-12 feet wide (attached to house) by 16-24 feet deep (out from the house). The private backyard pergola does not need to be exactly 12' x 24' like in the images on this page. The kit includes two (2) premium quality charcoal gray shade canopies in your choice of 6 size options: 8x8, 8x10, 8x12, 10x10, 10x12 or 12x12. The canopies are made of fade-resistant 180 GSM High-Density Polyethylene (HDPE) knitted fabric that blocks up to 95% of UV rays and is permeable to prevent rain from pooling on top. Each side of the shade canopies has 4 straps to keep it tight and prevent drooping. The kit also includes all necessary corner and side accessory mounts (including screws) to secure the shade canopy straps to the corner brackets and beams of the pergola. Finally, the kit also includes two (2) charcoal gray pergola privacy screens for two of the pergola's walls in your choice of 3 size options: 8' wide by 8' tall, 10' wide by 8' tall, or 12' wide by 8' tall. The privacy screens are made of the same fade-resistant 180 GSM High-Density Polyethylene (HDPE) knitted fabric that the shade canopies are made of. The kit also includes all necessary corner and side accessory mounts (including screws) for mounting the privacy screens.
• Preconfigured Privacy Walls: see this same kit with no privacy shade or with just 1 privacy shade see kit w/ no privacy shade or with just 1 privacy shade
• Preconfigured Roof: change roof to: straight 2x6s , 2x6s atop beams , 6x6 posts or angled 2x6s
• Preconfigured Slat Spacing: this pergola doesn't have any wood slats (add a slatted roof or privacy wall ) no roof or wall slats (add roof or privacy wall )
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this DIY privacy pergola kit, nor is the hardware you'll need to anchor the base brackets and wall mount brackets. Before you can build your covered pergola with 2 shade wall canopies, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 24' pergola that is 8' tall): Four (4) 8' long 6x6 posts Six (6) 12' long 6x6 posts Anchoring hardware (24 pieces total: 16 for the base brackets and 8 for the wall mount brackets) The estimated cost for the above lumber and anchoring hardware is $680 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• Roof Brackets Type: PRIVACY SCREENS w/ 24 mounting brackets
• Preconfigured Bracket Size: 6x6 BRACKETS
• Pre Key Info Blocks: 2-Block
• Pre Key Info Brackets: 6x6 Frame
• Pre Key Info Roof: 2-Canopy Roof
• Pre Key Info Type: Wall-Mounted
• Pre Key Info Walls: + 2 Privacy Sun Shades