Specifications

• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets and wall-mount brackets not included
• amazon bullet 3: About our steel brackets: 1) 14-gauge steel (approximately 2mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 1: Pergola kit includes: 2 base brackets, 2 wall-mount brackets and 2 3-arm post brackets (all for 4x4" wood posts) + 38 insert brackets for 2x4" wood slats + stainless steel screws (and screw caps) + complimentary drill bits
• amazon bullet 4: The 38 insert brackets allow you to add 19 2x4 angled roof slats to your pergola
• amazon bullet 2: Attached pergola can be any size up to 12 feet wide (attached to the house), up to 12 feet deep (out from the house) and up to 10 feet tall
• coverage area sqft: 144
• Assembled Height Ft: 8
• Assembled Width Ft: 12
• Assembled Length Ft: 12
• Required Lumber: As noted above, wood (lumber) is NOT included in this pergola bracket kit (nor is the hardware you'll need to anchor the base brackets and wall-mount brackets).Before you can build your pergola, you'll need to purchase the following items from a local building supply store or lumber yard:- Two (2) 8' long 4x4 posts- Three (3) 12' long 4x4 posts- Nineteen (19) 12' long 2x4 slats- Anchoring hardware (16 pieces)The estimated cost* for the above lumber and anchoring hardware is $325. Together with the cost of this Zen Pergolas bracket kit, your estimated total all-in cost for your pergola is $1024.*Estimate only - Actual cost will vary depending on the type of wood you buy, your location, local stores & availability and various other factors.
• Text Over Image - Dark: lumber not included
• Preconfigured Slat Spacing: between the roof slats / rafters (see kit w/ far or medium spacing) between roof slats (see far or med spacing)
• Preconfigured Privacy Walls: see this same kit with a privacy wall see kit with a privacy wall
• Preconfigured Roof: change roof to: canopy , straight 2x4s , 2x4s atop beams or 4x4 posts
• Roof Brackets Type: INSERT BRACKETS for 2x4 wood
• Max Roof Brackets Count: 38
• More Info About Kit: This wall-attached pergola kit will accommodate any attached pergola ranging from 4-12 feet wide by 4-12 feet deep . The house-attached pergola does not need to be exactly 12' x 12' like in the images on this page. The kit includes 38 2x4 insert brackets . While the images on this page show that all 38 brackets are used to add 19 angled roof slats to your pergola (covering a span of 12' with closely-spaced slats), you can use the brackets any way you'd like (i.e. adding a privacy wall or half/partial wall, adding a side railing, installing the roof slats straight up & down, etc.). You can also purchase additional 2x4 insert brackets here .
• Preconfigured Spacing Level: CLOSE SPACING
• Preconfigured Wall Count: 0 PRIVACY WALLS
• Preconfigured Roof Type: ANGLED 2x4s
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this 2-post DIY pergola kit, nor is the hardware you'll need to anchor the base brackets and wall mount brackets. Before you can build your pergola attached to the outside wall of the home, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 12' pergola that is 8' tall): Two (2) 8' long 4x4 posts Three (3) 12' long 4x4 posts Nineteen (19) 12' long 2x4 slats Anchoring hardware (16 pieces) The estimated cost for the above lumber and anchoring hardware is $325 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• Preconfigured Bracket Size: FOR 4x4s + 2x4s
• Pre Key Info Blocks: 1-Block
• Pre Key Info Brackets: 4x4 Frame
• Pre Key Info Roof: Slatted Roof (Angled 2x4s)
• Pre Key Info Type: Wall-Mounted