Specifications

• amazon bullet 2: Freestanding pergola can be any size up to 12 feet wide x 12 feet deep x 10 feet tall
• amazon bullet 3: About our steel brackets: 1) 14-gauge steel (approximately 2mm thick) - 2) Laser-cut, bent and welded - 3) Advanced weather coating technology to withstand extreme weather conditions - 4) Pre-drilled holes for securing wood and accessories to brackets - 5) Backed by a 5-year warranty
• amazon bullet 5: Wood (lumber) and specialty hardware for anchoring base brackets to a secure base not included
• Assembled Height Ft: 8
• Assembled Length Ft: 12
• Assembled Width Ft: 12
• coverage area sqft: 144
• Text Over Image - Dark: lumber not included
• Preconfigured Roof Type: SHADE CANOPY
• Preconfigured Wall Count: 1 PRIVACY WALL
• Preconfigured Spacing Level: MED SPACING
• Preconfigured Slat Spacing: between privacy wall slats (see kit w/ far or close spacing) between wall slats (see far or close spacing)
• Preconfigured Privacy Walls: see this same kit without a privacy wall or with a canvas privacy shade wall see kit without a wall or w/ a privacy shade
• Preconfigured Roof: change roof to: straight 2x4s , 2x4s atop beams , 4x4 posts or angled 2x4s
• Roof Brackets Type: INSERT BRACKETS for 2x4 wood wall slats
• Required Lumber and Cost: As noted above, wood (lumber) is NOT included in this privacy pergola DIY kit, nor is the hardware you'll need to anchor the base brackets and wall mount brackets. Before you can build your covered pergola with 1 wall, you'll need to purchase the following items from a local building supply store or lumber yard (assuming you plan to build a 12' x 12' pergola that is 8' tall): Two (2) 8' long 4x4 posts Three (3) 12' long 4x4 posts Thirteen (13) 12' long 2x4 slats Anchoring hardware (16 pieces) The estimated cost for the above lumber and anchoring hardware is $281 . This is only an estimate; actual costs will vary depending on the type of wood you decide to buy, your location, local stores & availability, and various other factors.
• More Info About Kit: This DIY privacy pergola kit will accommodate any attached pergola ranging from 8-12 feet by 8-12 feet . The private backyard pergola does not need to be exactly 12' x 12' like in the images on this page. The kit includes a premium quality charcoal gray shade canopy in your choice of 6 size options: 8x8, 8x10, 8x12, 10x10, 10x12 or 12x12. The canopy is made of fade-resistant 180 GSM High-Density Polyethylene (HDPE) knitted fabric that blocks up to 95% of UV rays and is permeable to prevent rain from pooling on top. Each side of the canopy has 4 straps to keep it tight and prevent drooping. The kit also includes all necessary corner and side accessory mounts (including screws) to secure the shade canopy straps to the corner brackets and beams of the pergola. The kit also includes 26 2x4 insert brackets . While the images on this page show that all 26 brackets are used to add one privacy wall with 13 slats (8' tall with standard spacing between slats), you can use the brackets any way you'd like (i.e. adding another privacy wall or half/partial wall, adding a side railing, adding roof rafters below the shade canopy, etc.). You can also purchase additional 2x4 insert brackets here .
• Max Roof Brackets Count: 26
• Preconfigured Bracket Size: FOR 4x4s + 2x4s
• Pre Key Info Blocks: 1-Block
• Pre Key Info Brackets: 4x4 Frame
• Pre Key Info Roof: Shade Canopy Roof
• Pre Key Info Type: Wall-Mounted
• Pre Key Info Walls: + 1 Privacy Wall