Overview

This pergola roof kit utilizes 2x4 rafter brackets so you can attach a series of 2x4 rafters above the 4x4 beams (creating a second roof "layer" to give the pergola's roof a more traditional look). The 2x4 rafter slats can (but don't necessarily have to) extend beyond the edge of the beams below them, creating overhangs on each end.

Steel Pergola Bracket Features

Proudly made in the USA with premium American steel
14-gauge steel (~2.0mm thick)
Laser-cut, bent and welded
Advanced weather coating technology to withstand extreme weather conditions
Pre-drilled holes for securing wood and accessories to bracket
Made for dressed lumber commonly called 2x4s (actual dimensions are 1.5” x 3.5”)
Includes stainless steel screws (1.5-inch #10 self-tapping wood screws with pan/round head painted black) for securing wood into bracket
Reduces your pergola build time by as much as 75%
Backed by a 5-year warranty
Shipped directly to your doorstep from Boise, Idaho
NOTE: Wood (lumber) is NOT included in this kit and will need to be purchased locally

Span, Spacing & Brackets

The following table shows how many 2x4 rafter brackets are included (together with stainless steel screws & black screw covers) based on the span (4, 6, 8, 10 or 12 feet) and spacing option (far, medium or close spacing) you choose.

Span¹	Spacing²	# of 4x4s	# of Brackets
4 feet	Far (24.5")	1	2
4 feet	Medium (16.0")	2	4
4 feet	Close (12.0")	3	6
6 feet	Far (24.5")	2	4
6 feet	Medium (18.0")	3	6
6 feet	Close (12.0")	5	10
8 feet	Far (24.5")	3	6
8 feet	Medium (16.0")	5	10
8 feet	Close (12.0")	7	14
10 feet	Far (24.5")	4	8
10 feet	Medium (17.5")	6	12
10 feet	Close (12.0")	9	18
12 feet	Far (24.0")	5	10
12 feet	Medium (18.0")	7	14
12 feet	Close (12.0")	11	22

¹ Span is the distance from outside edge to outside edge (including brackets) of the side of the pergola where the roof brackets will be attached.

² Spacing is approximate and denotes "on-center" spacing - i.e. the distance between the center point of one 2x4 to the center point of the next 2x4 (not the amount of space between the 2x4s).

Other Roof Kits for Pergolas with a 4x4 Frame

2x4 inline rafters roof kit - 2x4 slats are inserted between the beams (inline & flush) rather than above the beams
Angled shade purlins roof kit - 2x4 slats are inserted between the beams (inline) but are installed at a 45-degree angle (or another angle) to maximize shade
4x4 inline rafters kit - 4x4s (square posts) are inserted between the beams (inline & flush) rather than above the beams

Traditional Rafters Pergola Roof Kit (for 2x4 Wood Slats)